Hall with a mirror in the hallway - models and selection rules

There are several well-established opinions about the situation in the hallway. Of course, a lot depends on its configuration, but even if the corridors do not allow you to roam around in the choice of options, there are still alternatives to the standard solution. If you do not want to install a mirror wardrobe in a narrow hallway or just a wardrobe with a mirror insert, a hanger or a bedside table with a mirror can help out. And there are a lot of options for these cabinets - from cheap standard ones, without class and zest, to luxury and very unexpected outwardly.

How to choose a mirror with a curbstone in a hall

Decide which type of cupboards you prefer - shoe cupboards, standard cupboards or corner chests of drawers. This is very important, there are a lot of models, and they all look different in the interior. What does this choice depend on?

From the space that you have is in the first place. A small entrance hall is unlikely to "pull" a bulky stand with opening swing doors. Therefore, the mirror for such a hallway can be arbitrarily large, due to its reflective properties it will visually increase the space, but a stand will be large only if it is the only furniture in the hallway.

The second point is the finish. If the small entrance hall is light, perhaps even white walls, a ceiling and a very bright floor, you can afford a large cabinet of the same tones. But with the condition - the big one is not decorative, but really roomy.

Well, another important selection criterion is style. The cabinet should stylistically merge with the room. Simply put, if the wallpaper in the hallway with monograms, a loft cabinet or a high-tech style cabinet does not fit into the interior.

White curbstone with a mirror for an entrance hall

White is friends with white, first of all. This does not mean that you cannot let other colors into the space, but if your white mixes with walnut and wenge, you get a designer “tasteless” vinaigrette. If you combine white with another woody shade, then let this shade be one (and this applies not only to furniture, but also to decoration).

In which hallway does a white pedestal with a mirror fit:

In a bright hallway, made in soft colors,
In the hallway, where on the wallpaper there is a white drawing and a white edging (moldings, baseboards, etc.),
In the hallway with bright white accessories (floor lamp, lamp, bench, etc.)

But if the white stand has a black countertop and the mirror also has a black edging or other contrasting element, this is also quite acceptable. Place a wide black photo frame on such a stand for balance. Wallpaper in this case can be neutral - gray, turning into the color of cocoa, for example.

How to choose a mirror for a hallway with a curbstone

Most often, large-sized mirrors are selected for the halls - it is good when a person can see himself at full height. This is a proper installation also because the visual expansion of the space will interfere with the rare entrance. But think about whether you need a standard rectangular option - today's choice is more interesting than simple solutions.

Types of mirrors in the hallway:

Cloud,
Rhombus,
Eight,
Silhouette of a man
Rectangular mirror with beveled edges,
Asymmetric oval.

It is in fashion to make mirrors for individual orders. And sometimes a mirrored interior is made in the hallway, where the mirror by the curbstone is just the main violin of the orchestra, but also there are many mirror inserts throughout the room, in furniture elements, etc. It is clear that such an interior will need more care, but the aesthetic moment is delightful.

Scandinavian style corridors with mirror

Since the Scandinavian style is one of the most preferable today, one cannot but touch upon the topic of choosing the cabinets for such hallways. In general, it is far from always that there is a pedestal in the Scandinavian hallway. Since this style is prone to humor and interesting, but not necessarily extravagant decisions, instead of a curbstone in the hallway there can be a chest, a retro table or just a bookcase.

But if you want exactly a curbstone, then it can be furniture of an elongated shape with an open shelf below. They usually put wicker baskets for storing all kinds of little things. It may be a laconic light (usually white) cabinet with the same size, often square, drawers. White walls, a light floor, a white roomy cabinet and a bright patchwork rug near it are one of the favorite decisions of the style.

The second life of old things: the decor of the old pedestal

There are many modern concepts according to which - hoarding and consumption are the vices of society, and this is worth avoiding. So, do not throw away the old, but transform, decorate, revive. And if you approach this matter wisely, then a thing can turn out better than any newfound one.

How can I transform an old pedestal:

At worst, to cover it with decorative paper is cheap and cheerful, but if everything is done carefully, it will turn out very nice,
Remove varnish, degrease and repaint - pastel colors transform Soviet furniture, especially simple white,
Combine painting with wallpaper decoration - the wallpaper will cover the facades of the bedside table, and the joints will be painted over,
The curbstone can be artificially aged - look at the examples that the shabby-chic style offers, of course, this is not an option for all living rooms, but if you are interested in the spirit of antiquity and you probably support it, it’s not just new furniture that will save you, but exaggerated old (special materials can be found in needlework stores and construction markets).

Finally, decoupage is a method that requires strength and diligence, as well as some artistic skills. But where else will you buy such an exquisite thing that will be in a single copy? A few days of work, and the old dull bedside table turn into an element of the interior that will please you for a long time, and impress guests.

Types of construction of cabinets with a mirror

The following possible forms of pedestals are traditionally distinguished:

Combined. The mirror is an integral part of the cabinet, constituting a single whole with it,
Separate. The mirror is part of the furniture set. It is performed in a single style with the rest of the elements, but it requires a separate suspension on the wall.

Shapes and sizes of mirrors

Modern industry has long been no longer limited to the production of only rectangular mirrors. Today it can take any form. This is facilitated by high-quality laser-based cutting equipment. In addition to traditional flat, you can find spherical models. Such a mirror gives a full overview of the entire room at once, capturing not only the center. Such variations are called fisheye lenses. In fact, these are the ancestors of security cameras that were previously used in antique and jewelry shops.

Classic exterior mirrors with regular geometric shapes provide the following size range standards:

Height 55 cm, width 40 cm,
60x35 cm
70x50 cm
80x60 cm
90x50 cm
100x40 cm
120x45 cm
140x50 cm
140x70 cm.

As can be seen from the values, the width of the mirror sheet is standardly 2 - 2.5 times less than its height. The only exceptions are square or adjacent models.

What are the mirrors

To date, the most dangerous components have dropped out of mirror production - lead and mercury, which produce toxic fumes. They were replaced by safer metals. This is aluminum, titanium, silver. They are used to make amalgam individually or in a mixture, giving the mass new properties. For example, titanium powder added to an aluminum amalgam makes it substantially stronger.

To get a perfectly smooth reflective surface, the glass goes through the following steps:

Molding
Polishing. If the mirror gives a wave in the image or significantly distorts reality, then this stage was not
Degreasing. Skipping this action during production is fraught with rapid exfoliation of the amalgam,
Flushing. Helps get rid of reagent residues,
Amalgam application,
Coloring inside out. Two-layer protection is considered the best.

Before you find your buyer or get on the shelves, each mirror goes through a double culling with strict quality control. But, some types of marriage may result from improper storage and transportation. Therefore, in the store do not be lazy to check the quality of the cut edges and the integrity of the wrong coating. Such defects are the reason for the rapid loss of reflectivity of the mirror.

The following types of mirrors are distinguished as an original design element:

Aged. Amalgam artificially destroyed in places. Their beauty is controversial and not everyone likes it,
Curly. They can have the most unexpected forms - a flower, an animal or a radiant sun. They look very beautiful and do not require the use of a frame,
Faceted. A special cut is applied along the edge of the mirror sheet - facet. It is performed at an angle to the main canvas with the creation of faces. Able to create sun glare. Compound typeset mirrors from several elements decorated with fats are most beautifully looked. The method will make the mirror more expensive, but it can be used without a frame,
Multiple. This is a kind of panel, recruited from a large number of curly mirror segments. It will not become a full-fledged reflector, but it will help to create an unusual interior,
Psyche. Such mirrors at different angles can either reflect or look like plain glass,
Colored. For this, the coloring pigment is added at the stage of manufacture of the amalgam. It can have shades of bronze, gold, graphite, greenery. Such a mirror is likely to become an unusual element of decor, although reflection will give in full.

Mirror frame

The main decoration of the mirror can rightfully be called a frame. The following types are distinguished:

Geometric The shape of the frame coincides with the slot,
The combination of geometric shapes. The frame itself is rectangular, and the cutout under the mirror is oval. It can also be a combination of a square with a circle. There are many options
Curly. The solid frame is decorated with volumetric stucco or carving. It can be of any degree of difficulty,
Through. The entire plane of the frame is made openwork. They look very beautiful. Make massive mirrors visually easier
The sun. This frame is used for round mirrors and resembles a lot of sunlight,
Flower. It is made in the form of through looped or concave petals,
With a partial approach to the mirror. The frame design includes a rare openwork mesh that covers part of the reflector,
Cup-shaped. The frame is concave. Far ahead of the surface of the reflector. Reminds a suspended deep bowl.

For the manufacture of materials used are durable, but at the same time easily moldable:

Synthetic plastics and polymers,
Softwood,
MDF
Metals
Plaster stucco molding with coloring.

Frame - structural elements, materials and dimensions

The composition of the frame of any bedside table under the mirror in the hallway includes the following elements:

Sidewalls. Depending on the design, they can be 2.4 or 1 (semi-embedded),
Back wall,
Bottom,
The upper bar.

The main materials for manufacturing are:

Pressed particle boards (fiberboard, particleboard). The material is easy to process, but requires additional protective coating. It does not tolerate contact with water and the proximity to heaters,
MDF. More dense and durable material, resistant to moisture. At the same time, democratic prices and availability remain. All this can be attributed to varnished options (chipboard, LMDF),
Wood. Durable material with a long service life. Not only pleasing price tags and exacting care. But the appearance is on top,
Plastic. A budget option. It looks pretty good, but it does not like overloads. Afraid of mechanical damage.

The entrance hall almost always does not please the owners with modest dimensions. Often, it is generally performed in the form of a narrow corridor. Therefore, the size of the furniture is not particularly clear. The following dimensions are considered to be typical:

Wide. Width begins to "dance" from 1 meter. The height is usually enough from 50 to 80 cm. The depth rarely exceeds 35 cm.
High. Here the 1 meter bar goes to height. This does not mean that it is a ceiling. But, the cabinet itself is rarely higher. Basically, the design extends the rear panel and serves to mount mirrors or hangers. Average width 60 cm
Narrow Width does not exceed 45 cm. Usually this is offset by stretching up to 1.5 meters. Such models are more like pencil cases.

Placement Methods

Most often, variations with a high back wall are made floor-standing. After assembly, such a cabinet is simply installed close to the wall on the floor. A significant role in the choice is played by the legs:

Classic. They are 4 supports of any height, placed at the corners of the housing. They require a flat floor. The longer the legs, the more negatively they react to floor differences in height,
Emphasis. They are placed at the corners of the frame with a deviation from the vertical. From the side it seems that they sank under the weight. More sustainable option
Adjustable. Special screws are supplied with several wide flat washers. Twisting them, you can change the height of each leg individually. Convenient in the presence of curved floors. Appearance is poor
Videos. Significantly facilitate the process of moving furniture. They are covered with decorative protective covers. Stoppers required
Basement system. Instead of legs or as an addition to them, elongated sidewalls act. A base is attached along the front. This is a narrow bar that acts as an external stop. Also carries a decorative load.

Headset elements with more modest dimensions can be hung on the wall. To do this, it is better to choose high-quality fasteners. The most commonly used anchor bolts or special furniture awnings. Both options are distinguished by stability after installation, and the ability to withstand heavy loads. Fragile ear loops are best discarded right away.

It is better not to suspend cabinets equipped with a soft lid replacing the bench. So you lose most of the functionality of this element. It is strictly forbidden to sit on hanging stands.

Filling

The storage system of bedside tables with a mirror in the hallway traditionally includes drawers suitable for storing small related accessories. Small boxes are convenient for storing shoe creams, gloss, cleaning sponges. Shelves can be not only straight. Preferred options with a sloping bottom type shoe. So during storage, the shoes will not lose shape. Just do not put several pairs in one section. This will cause the backs to jam with scratches. The most preferred design for shoe compartments is the installation of grilles (cell shelves). They can be made rising or in several tiers. In addition to high-quality storage, the shoe is provided with proper ventilation while drying. For storing gloves, several medium-sized clamps can be attached. So you do not have to spend time searching for them.

Facades

Traditionally, the following varieties of facade opening systems are used for hallways:

Retractable. These are well-known boxes. They are supplied with narrow side guides with rollers. To open, just pull on yourself. In this case, the boxes take up a lot of space in front of the cabinet. Provide a free approach to the facade. Installation of guides with distortions is fraught with jamming of boxes,
Folding.Most often, the system is used to design shoe sections. The sash is hinged at the bottom. Opens outward down. It is held in position by means of side holders with a position lock. Swing the door slightly to close. So you take it off the hold,
Swing. Doors are attached to the body using movable hinges. Open them out onto yourself. It will also require enough space in front of the furniture. The system does not tolerate pressure, strong jerks, distortions. All this can cause the loop fasteners to be pulled out. Otherwise, the method is more than reliable. Allows you to hide the contents of shelves from prying eyes.

Features

A curbstone with a mirror in the hallway interior is able to solve several issues of space organization at once:

it is compact
can contain all the necessary elements - hangers, hooks, boxes for small things, shelves for shoes,
equipped with a mirror to - a necessary attribute of any hallway.

The most important thing that you should pay attention to when choosing a cabinet with a mirror is the structural stability and material strength. As a rule, the mirror that comes with the cabinet has rather large dimensions, which means that the cabinet body must hold it without additional fastenings to the wall. If a shelf for hats is located above the mirror, pay attention to the built-in backlight. If not, then the shelf will obscure the mirror.

Narrow high pedestal, or low wide - the choice should depend on the parameters of the hallway and the availability of free space in it. If it is too small, then you can consider options for compact corner pedestals. Such models are produced by Baltic furniture companies or firms from other CIS countries. A small pedestal will easily take a corner and free up the hallway space.

Materials of manufacture

A cabinet with a mirror is a rather heavy and impressive design, even though it can be quite small in size. A mirror is the main cause of gravity, and it is precisely its presence that requires special strength of the whole item.

When choosing this type of furniture, it is worth paying special attention to the materials used to manufacture the product, because the durability and stability of the product, and therefore safety, depend on them.

The most common material for curbstones in the hallway are MDF or chipboard boards. This is a fairly durable material, in appearance it can be difficult to distinguish from a wooden beam. Also, such plates can have upholstery made of thin plastic or film for various types of wood.

Wood furniture is considered to be elite and has a rather high price. Natural material itself is durable, environmentally friendly, and has increased strength. Wood furniture is able to emphasize the refined taste of the owner, especially if the interior of the house is made in such styles as classic or art deco.

Metal, as a rule, is present in all modern models as accessories: fasteners, hinges, mechanisms, as well as decorative elements. For example, on wooden products of a classic style, it can be gilded metal jewelry. But there are models consisting entirely of alloys. They look thin and delicate, while they have sufficient strength. Such models fit well with the style of Gothic, Baroque or Art Nouveau. A slightly different plan, but also very successful, the metal looks in the style of hi-tech or loft.

Glass in the manufacture of cabinets in the hallway is used only as individual elements, since this material does not support the weight of the mirror. But in different styles, glass can be used as an element of decor for cabinets. For example, a combination of steel or forged rods can be combined with glass or mirror surfaces.

Plastic is a profitable democratic option of working mechanisms. However, as a material, it is short-lived, but affordable and easily interchangeable. Solid models made of plastic are quite rare and are more suitable for bathrooms. In the hallway, such models look too rustic and poor.

Varieties

There are two types of cabinets with mirrors: floor and wall mounted. But first you should pay attention to the types of pedestals.

Combined model. A mirror with a curbstone are one integral module.
Separate model. A mirror is part of a furniture set. It is performed in the same stylistic direction with other elements and requires a separate suspension.

Types of pedestals can be either open or closed. Open cabinets are usually made from expensive materials, such as wood or metal. The frame has special compartments for storing shoes. The advantage of such designs is that all shoes are ventilated and do not absorb odors. Of the shortcomings, it is worth noting the rapid accumulation of dust.

The closed type of cabinets with mirrors implies the presence of drawers and compartments. The number of drawers depends on the model. The advantage of the product is that all items, accessories and shoes are hidden from prying eyes.

In addition, the prevention of dust from entering the structure can be called a plus.

There are also small tables that are equipped with a padded seat and a pull-out module for storing small items. Such models are very convenient. It is always pleasant to return home after a hard day's work and relax a bit, sitting down on a soft nightstand. The listed species are referred to as floor stands.

Hinged models have an original appearance. These mirror cabinets are hung on the wall. This arrangement saves space. You can place shoes or an umbrella under the hinged module. When buying a product, you should pay attention to the mirrors. They have some differences in design.

We list the most original solutions in the design of mirrors.

Curly Mirror Elements may take the form of a flower, animal, silhouette or sun. Mirrors fit perfectly into the interior and do not require a frame.

Mirrors with facet cutting along the edge. Special cutting creates a reflection of sunlight. Composite models of mirrors with facet elements look original. The design method gives the furniture an expensive look. It also does not require a framework,

Multiple Mirror Elements consist of several curly parts that look like panels. With the help of such mirrors, an original interior design is created.

Colored mirrors. Such an element will become a chic part of the decor of the hallway, as in the manufacture of amalgams add paint. The coloring pigment has shades with notes of gilding, bronze, graphite or green. But in any case, the mirror perfectly reflects the image.

How to choose?

There are criteria for choosing any furniture, including cabinets with a mirror in the hallway. Here are a few recommendations that will make the choice a lot easier.

Product quality. When buying, you must ask the seller for the necessary documents confirming the quality standards and production standards. And also it is worth remembering that cheap furniture is not always a bad option.
Product reliability. This criterion is considered the most important aspect in the matter of choosing a bedside table with a mirror. A mirror is a heavy structural element that requires a solid foundation. Pay attention to it.
The correct mechanism for the operation of retractable systems. When buying, make sure that the retractable systems work. Storage drawers and compartments should slide out smoothly and silently. Squeaks or suspicious sounds indicate a low quality product. Closers, rollers and other mechanisms must move without any jerks.
Shape and size. Before going to the store, it is necessary to take measurements of the designated place for the module. This will give a clear understanding of what shape and size are suitable for the hallway.
When choosing, you need to pay attention to the mirror. The clean and smooth surface of the mirror indicates its high-quality production. The base of the glass should have a strong connection with the cabinet, it should not be tilted or staggered.

Chipboards from MDF and MDF should have a well-glued and protected surface. To protect the surface using a PVC film. Some models protect veneers, which significantly increases the service life. To protect the seams and drill holes, the exact same method is used.

The cabinet should be combined with the interior of the corridor. The classic design is characterized by the presence of many elements of decor and furniture. The small bedside table is perfect for the classic interior of the hallway. You can pick up a small bedside table made of natural wood with a pattern, engraving or carving. There is always a lot of light in the classic hallway. Therefore, a large mirror is perfect as an additional increase in the hallway space.

In high-tech and modern styles, modules with mirror elements are not used very often. The interior is complemented by hanging mirrors and cabinets, separate from each other. These directions in design are characterized by minimalism, so you should not choose too complex models. They will look out of place.

Pop art design complement the cabinet with a mirror element and built-in lighting. The view of the bedside table, close in shape to the studio dressing room, will be a bold decision, and the bright juicy colors of the furniture will cheer you up. Loft also means placing in the hallway bedside tables with a mirror. In such a corridor, cabinets perfectly fit under a dark tree with sliding compartments or open shelves. Glass surfaces are welcome.

Under the eco style furniture from natural materials is selected. Typically, this style is characterized by wood furniture. Before buying, you should decide for what purpose you need a cabinet. If it will be designed to store a large number of shoes and accessories, then you should choose a closed model with shelves and compartments.

Or is it more convenient for you to keep your shoes in sight, then choose an open model. The final decision, in any case, lies with the owner.

In the next video, you will find a guide for assembling a cabinet with a mirror in the hallway of "Rendo."

Subtleties of placement

A curbstone with a mirror in the hallway interior is not only a decoration of the space, but also a necessary functional piece of furniture. Therefore, from its proper location depends on how it can fulfill its purpose.

In the hallway of a small-sized apartment, the cabinet should not interfere with movement, and in the spacious hall it should not get lost and stand far from the entrance or the light source.

Lighting and proximity to the exit - perhaps the most basic rules for the location of the pedestal with a mirror. We put the finishing touches on our clothes on the doorstep of the apartment, so it’s more convenient to look in the mirror just before you cross the threshold. This is also facilitated by the fact that the closer the design to the front door, the smaller the distance in street shoes will have to be overcome in the hallway in order to straighten your hair or scarf and finish putting on your shoes.

Another important function of this type of furniture is to store all kinds of items that we take with us daily. For keys, glasses, gloves, special boxes can be allocated. When each thing has its own place, this allows you to maintain order and not to forget important little things when leaving your home. The cabinet can also be supplemented with a panel with hangers for everyday wear.. As a rule, it is made in general with a curbstone and a mirror style, it has several hooks and hangers on which you can hang a jacket or a raincoat, so that later you can put them in a common wardrobe for outerwear. Such panels can also be equipped with holders for umbrellas.

The light incident on the mirror should also be considered. The curbstone must be positioned so that the main light source does not blind the mirror surface. If the room is quite dark, then the illumination from above or from the side of the mirror, in the manner of dressing rooms, will be most welcome.

It is desirable that in front of the mirror there is room for the opportunity to look at yourself from all sides, moving away. Sometimes it is possible to do this even in small narrow hallways.

Do not forget that the opening doors of the cabinet or drawers must not interfere with passage, and if this is impossible, then at least you need to make sure that they do not hit against other objects or door jambs. This will protect both from damage.

Style solutions

To place a hallway, any cabinet with a mirror will become the main element of the interior. The mirror attracts attention, visually increases the space, fills it with light. Therefore, any design that “frames” the mirror, or any furniture around it, becomes the main focus of the room. This rule does not apply to other rooms, for example, the bed plays the leading role in the bedroom. But in the hallway a mirror always reigns as the main attribute of the room.

In order for the cabinet with a mirror to harmoniously fit into your interior, you need to decide on the general style of the interior.

Classic

Perhaps the most standard option is to choose models for which it will not be difficult. It is in the classical style that dressers with mirrors turn out to be the most refined and elegant. Classics love spaces filled with mirror surfaces and noble varieties of wood.

Hi-tech and modern

Curbstones in these styles will be unusual futuristic shapes, with lots of metal and mirror elements. The color range varies in white and silver with a deepening in dark shades of gray and even black. The mirror as the main element can be framed by a bright spot of intense hue. The same may be the details of the design.

Minimalism

This modern, practical style dictates simplicity and convenience in everything, therefore the curbstone with a mirror in the hallway will be as simple and convenient as possible, made of MDF panels and quite affordable in cost. Laconic lines, discreet colors, a minimum of drawers and jewelry. Nothing distracting, full compliance with the modern rhythm of life: functionality and comfort.

Provence

The rooms in the style of rural France and lavender fields are characterized by delicate pastel colors and openwork forged curls on furniture, as well as warm sunny wood. A cabinet made of chipboard coated with a simple wood without an excess of gloss and varnish is suitable for this style. Decorations in the form of inlays with ceramics or wrought-iron floral ornaments are welcome.

Country and Ethnic Style

The subjects of these styles are characterized by the presence of ethnic orientation, as well as national color. The curbstone with a mirror in the hallway should be made in accordance with one or another vector in this style, otherwise it will sharply dissonant with the surrounding atmosphere of the room. As for materials, this will undoubtedly be a simple tree, as close as possible to the "natural" direction.

Selection tips

Choosing any home furniture, pay attention not only to the appearance of the product, but also to its quality. Even a small cabinet with a mirror is a rather heavy and bulky design, therefore, it is especially important to verify its strength:

check the attachments and compartment mechanisms in the cabinet,
pay attention to the manufacturing material itself - it must withstand the weight of the mirror and at the same time be stable so that the mirror element does not outweigh and pull it down. This is especially true for models of pedestal stands,
make sure the quality and cleanliness of the surface of the mirror, as well as its fastening to the holding panel. The mirror should be “poured” into the overall design of the cabinet, making it one whole,
when choosing cabinets from MDF or chipboard, pay attention to glued seams - they must be protected with veneer for the duration of the product.

About how to independently assemble a curbstone with a mirror in the hallway, see the video below.